wormvine Posted December 2, 2015 Report Share Posted December 2, 2015 Hello Mates, I have a question regarding the Penn Clash 3000 and 4000. It appears to me, looking at the specs of these 2 reels that they may share the same reel body and that only the spool is different for line capacity. Can anyone confirm or refute this? Also, If this is true, Are the spools interchangeable between 3000 and 4000? I appreciate the input and Thanks in advance, Adam Link to comment Share on other sites More sharing options...
avet4life Posted December 2, 2015 Report Share Posted December 2, 2015 Adam, From the schematic, it list many part for 3k and 4k,,, not sharing the 3k part, example the bail, body, etc, so I am not sure that is a 3k body with a 4K spool would work or not. Link to comment Share on other sites More sharing options...
wormvine Posted December 2, 2015 Author Report Share Posted December 2, 2015 (edited) Hey Avet4life, That is interesting. After reading your post I went over to "Some other place" and looked at their parts lists and compared. They do share similar parts like the "98-SSV3500 Clutch Sleeve Assembly" and the same drag washers. Specs list their drag pressure at 15lbs each and their weight difference is .5 oz. I'll keep researching and hopefully others can share their input. Thanks, Adam Edited December 2, 2015 by wormvine Link to comment Share on other sites More sharing options...
Beastly Backlash Posted December 2, 2015 Report Share Posted December 2, 2015 If you look at the schematics you will notice that the body, rotor, and main shaft are different. The main gear, pinion, and everything else, for the most part, is the same. Link to comment Share on other sites More sharing options...
Beastly Backlash Posted December 2, 2015 Report Share Posted December 2, 2015 With the rotor on the 3000 being smaller, I doubt a 4000 spool would fit. Link to comment Share on other sites More sharing options...
FlukeOff Posted December 2, 2015 Report Share Posted December 2, 2015 You should post this in the Penn forum. Tony will reply quickly with the correct answer. Cheers! This ground is not the rock I thought it to be..... Link to comment Share on other sites More sharing options...
wormvine Posted December 2, 2015 Author Report Share Posted December 2, 2015 (edited) You should post this in the Penn forum. Tony will reply quickly with the correct answer. Cheers! That sounds like a good idea but I can't find a specific Penn forum. I only see the Fishing Industry Insiders forum and I cannot post there. I'll keep looking. It's been a long day and I may just be going full doofus. Edited December 2, 2015 by wormvine Link to comment Share on other sites More sharing options...
FlukeOff Posted December 2, 2015 Report Share Posted December 2, 2015 Hey Adam - I just posted your question there. Will let you know what Penn says This ground is not the rock I thought it to be..... Link to comment Share on other sites More sharing options...
wormvine Posted December 3, 2015 Author Report Share Posted December 3, 2015 Cool Thanks. I think I found where you posted it. I'll keep an eye on it. A Link to comment Share on other sites More sharing options...
mackerel hunter Posted January 20, 2017 Report Share Posted January 20, 2017 I found this old post about using a Clash 3000 spool on a 4000. Also a Penn posting which said they use different rotors so it won't work. I just put a 3000 Penn Clash spool on my 4000 Clash and it fits and seems to operate ok. Can anyone else weigh in on this. Link to comment Share on other sites More sharing options...
PENN Fishing Posted January 20, 2017 Report Share Posted January 20, 2017 I found this old post about using a Clash 3000 spool on a 4000. Also a Penn posting which said they use different rotors so it won't work. I just put a 3000 Penn Clash spool on my 4000 Clash and it fits and seems to operate ok. Can anyone else weigh in on this. It will fit but the line lay would most likely be bad. tony Link to comment Share on other sites More sharing options...
sytheteacher Posted January 21, 2017 Report Share Posted January 21, 2017 Will the 4000 fit on the 3000?? And operate... Link to comment Share on other sites More sharing options...
.thumb.jpg.bb0afd128791a8e562a0aef19c7489b1.jpg)
Recommended Posts
Create an account or sign in to comment
You need to register here in order to participate.
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now