fishtheeast Posted December 17, 2022 Report Share Posted December 17, 2022 Anyone know anything about these boats? I can’t find anything online. Link to comment Share on other sites More sharing options...
KironaFly Posted January 5 Report Share Posted January 5 On 12/17/2022 at 1:35 PM, fishtheeast said: Anyone know anything about these boats? I can’t find anything online. They popped right up after a google search. Dinghy type boats. RockfishOn!! Link to comment Share on other sites More sharing options...
fishtheeast Posted January 5 Author Report Share Posted January 5 11 mins ago, KironaFly said: They popped right up after a google search. Dinghy type boats. Yup I was looking for information about them other than the basic specs their website lists. Like if they are a junk or a decent boat. Link to comment Share on other sites More sharing options...
Rhett Posted January 26 Report Share Posted January 26 They make a fiberglass dinghy, I don’t know how they could screw that up unless the laminate schedule was totally wrong. It looks like it’s out of their home so they probably don’t make a ton of them and would likely take a little more time and care doing a decent job. Have you tried contacting them? Link to comment Share on other sites More sharing options...
fishtheeast Posted January 26 Author Report Share Posted January 26 5 mins ago, Rhett said: They make a fiberglass dinghy, I don’t know how they could screw that up unless the laminate schedule was totally wrong. It looks like it’s out of their home so they probably don’t make a ton of them and would likely take a little more time and care doing a decent job. Have you tried contacting them? They also made a 14ft skiff. I’m looking into a used one from 02. Link to comment Share on other sites More sharing options...
Rhett Posted January 26 Report Share Posted January 26 Ah, I’m not familiar with them. I’ll ask around and see if any locals know them. Most of the local small boat builders I’ve seen tend to overbuild their stuff, which is kind of nice but you need a little more power to get it going. Stur-d-boat comes to mind. It’s the larger production builders that tend to cut corners but even then it’s mostly about aesthetics because nobody wants the liability of building a crappy boat. Do you know who the designer of the boat you are looking at was? Or maybe what the hull design was called? There are a lot of older moulds knocking about that get resold to another company and they start building them. Nothing wrong with that, moulds are expensive. Link to comment Share on other sites More sharing options...
Rhett Posted January 26 Report Share Posted January 26 Just spoke to a buddy of mine who is familiar with them. He said they build a pretty nice little boat. Link to comment Share on other sites More sharing options...
valentine Posted February 1 Report Share Posted February 1 On 1/26/2023 at 5:53 PM, fishtheeast said: They also made a 14ft skiff. I’m looking into a used one from 02. I went to their factory back around 2005 or so. I’m not sure it’s the same people who are running things today but back then it was a small operation but they built good products and knew what they were doing. Beacon built a 16 foot outboard skiff which I remember being produced by another company in the 1970’s. Back in the 70’s it was known as a “Stonington Skiff.” I asked the guy at Beacon if their boat was in fact the Stonington and he confirmed that it was. That was a solid, well made boat and you’ll still find today them being beaten and abused in boatyards as work boats. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to register here in order to participate.
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now