FS: 2x JDM Daiwa Sealine 600GM, (a low geared Gold Saltiga 40)

[EricL]

cleaning my collection display out a bit.

 

if you never had a chance to buy the full gold color anodized  Saltiga 30T 40 or 50, years ago, as it was extremely limited run.

even I dont have any gold Saltigas in my collection. and i aint paying $600-900 for one.

 

a great alternative was this JDM Sealine 600GM

is it the same size as the Saltiga 40, as shown in the picture.

The Saltiga 40 is not for sale, as thats my extra heavy heaver big bait reel.

 

the 600GM's are about 20 years old.

all bearings were changed out and cleaned/relubed all moving parts.

everything works great.

normal wear and tear on exteriors.

 

spools has some corrosion but brushed them cleaned and shot gold paint to stop it from going anymore.

just fully tape the arbor or line it with a full layer of thin mono before you load up braid.

 

it has a lower gearing than the USDM Saltiga 30T 40 50

the sealine 600gm had a 4.2:1 ratio  where as the USDM Saltiga had 4.9:1

it also had a higher max working drag at like 29lbs compared to the saltigas 25lb.

more power!!  best for heavy jigging, vertical jigging, bottom wreck fishing, even trolling if needed.

i used them for cod and wrecks. lovely to work with.

 

does not have clicker or pin brakes like the Saltigas

and the 6 point drag star is a nice addition. nice blingly reel. did i mention its fully gold anodized?

reel auto engages with handle crank.

 

Stock drag materials works great.  You can upgrade to carbontex if wanted by contacting dawn and buying the saltiga 30t 40 50 washers.

 

no boxes or clamps.

$320 shipped for the slightly nicer cosmetic one (left)

$270 shipped for the slightly more worn exterior one. (right, its has some more scuffs on the left rim)

take both for $520 shipped.

Or cash local 11209

 

PPFF, VenmoFF, Zelle.

If you want G&S +3% and I'll run it through my business PP invoice and potentially have to charge you sales tax.

 

 

buy with confidence, as with any reel i part with. if you dont like it, or its not as described.

i will always take it back. no questions.

 

Brand	DAIWA
Model	SEALINE 600GM
Reel type	BAIT CASTING
Gear Ratio	4.2:1
MAX DRAG	13kg
LINE PER HANDLE TURN	78cm
LINE CAPACITY	6-400m , 8-300m , 10-230m
Ball  Bearing	7+1
Weight	700g
HANDLE	RIGHT

Edited December 12, 2022 by EricL

[EricL]

The reason the reels are durable.. The gears are massive and chunky. It'a teeth are 4 quarters thick.

 

Thats a new old stock spare gear and pinion I keep handy

[EricL]

bump, please dont let minor surface corrosion of the spool arbor turn your off.

thats one of the places that has the least affects on a reels usage, until you corrode so badly, you literally have holes like a old car door panel, then, id be worried.

Edited December 14, 2022 by EricL

[EricL]

Bumper.  500 shipped

 

 

FYI.  If you already have a Saltiga 30t 40 or 50.   These reel parts are interchangeable.

 

So you can make silver, blue, and gold two tone reels.

 

Maybe a silver frame, blue spool, gold side plate..

 

Or a gold reel with blue spool.

 

Etc.

Edited December 17, 2022 by EricL

[EricL]

xmas bump.

ill throw in a random freebie if purchased.

Could be a reel, tool, line, lure, lead, coal, whatever I have around.

Offer good till new years.

 

also FYI

if you want to upgrade to a standard saltiga 40 ratio.

good news is that daiwa japan still has gear sets available.

Edited December 25, 2022 by EricL

[EricL]

last call and moving it elsewhere.

$500 shipped for both.