· #1 Posted July 25, 2021 I replaced my old tacky stella 4000XGFI handle with this and found out about the 5 different washer size. For those who have read the amazon reviews some are stating to loosen the screw if handle doesnt spin and some complains that there are slight play. I hope this helps those who plan on buying or have bought this knob You need to mix and match the washers until you find the perfect fit with the screw tightened without any gap/play in the handle knob but yet it still spins freely. Made a video for this I hope this helps. 1 Go to top Share this post Link to post Share on other sites
· #2 Posted July 27, 2021 Add some loctite to this installation. These handles are notorious for loosening. 0 Go to top Share this post Link to post Share on other sites
· #3 Posted July 27, 2021 Huh, i never even thought to check for any washer thickness differences...i'll have to recheck if i can reduce the gap on my two. 1 Go to top Share this post Link to post Share on other sites
· #4 Posted July 27, 2021 5 hours ago, DaveC said: Add some loctite to this installation. These handles are notorious for loosening. Is this the knob itself or the screw? Or both? Lol 0 Go to top Share this post Link to post Share on other sites
· #5 Posted July 27, 2021 2 mins ago, Rush2808 said: Is this the knob itself or the screw? Or both? Lol Both 0 Go to top Share this post Link to post Share on other sites
· #6 Posted July 27, 2021 Not crazy about the feel on one of mine. It was the ultegra I drilled . The direct fit saltist feels fine 0 Go to top Share this post Link to post Share on other sites
· #7 Posted July 27, 2021 I dont usually change parts on my reels but those rubber paddle knobs gets tacky after a while and it bothers me... 0 Go to top Share this post Link to post Share on other sites
· #8 Posted July 27, 2021 Thanks for sharing. I have been curious about these handles for a while. 0 Go to top Share this post Link to post Share on other sites
