Stripsettter Posted May 9, 2021 Report Share Posted May 9, 2021 Looking for an 11 footer for throwing the light stuff far. Has to be 11 foot, custom or factory, 1 or 2 piece. I’m flexible. Something rated at 3/4 or 1 oz and up. ODM, Century, CTS... let me know what you have. No Bait. No Barbs. No Buckets. Link to comment Share on other sites More sharing options...
gray gables Posted May 9, 2021 Report Share Posted May 9, 2021 Might have something for you. I had a spinning rod built from Chris Aubut of Aubut custom rods. It’s an 11’6” spinning rod, two piece spinning. I had it built for strictly plugging the canal. All black alconite k guides, black wraps and black grips. Reel seat is 28” to the center from the butt. X flock grips on the butt section and foregrip. I think it would fit your needs perfectly. Rod is in perfect condition, no scratches,dings or nicks at all. I can send photos of via text if your interested, let me know Matt. Link to comment Share on other sites More sharing options...
Stripsettter Posted May 10, 2021 Author Report Share Posted May 10, 2021 Thanks . What blank is it and rod rated 3/4 or 1oz- 3? I thought canal rods were usually heavier 2 or 3+ on the low end. No Bait. No Barbs. No Buckets. Link to comment Share on other sites More sharing options...
fishless Posted May 10, 2021 Report Share Posted May 10, 2021 I have an 11ft Lamiglas Arra. The guides were upgraded and with an improved layout. It is 3/4 to 4. "I was a waste of time dumbasses" Sevenxseventy1 Link to comment Share on other sites More sharing options...
yogiiiboy Posted May 10, 2021 Report Share Posted May 10, 2021 (edited) I have a custom 11' CTS S8 used about 5 times in mint condition wrapped by RH Customs Rods. Two-piece 50/50 split, 1-3 oz. rating that "Bombs" lures out there......this rod can also toss 1/2 oz. bucktails with no problem..... Edited May 10, 2021 by yogiiiboy Link to comment Share on other sites More sharing options...
misha Posted May 10, 2021 Report Share Posted May 10, 2021 (edited) I have factory Lamiglas GSB 11LS. Rated 1-3oz. It's a moderate rod. You can go as low as 1/2 oz and up to 3.5 with it. Great condition. Edited May 10, 2021 by misha Link to comment Share on other sites More sharing options...
gray gables Posted May 10, 2021 Report Share Posted May 10, 2021 10 hours ago, Stripsettter said: Thanks . What blank is it and rod rated 3/4 or 1oz- 3? I thought canal rods were usually heavier 2 or 3+ on the low end. It’s a Florida angler blank. Made by Steve Austin who made the AFAW years back. It’s not a beefy blank. It would throw 1 oz to 3oz no problem. 3/4 oz it would throw but it would depend on the reel and line combo your using. It’s a beautiful rod though. Link to comment Share on other sites More sharing options...
Stripsettter Posted May 11, 2021 Author Report Share Posted May 11, 2021 21 hours ago, yogiiiboy said: I have a custom 11' CTS S8 used about 5 times in mint condition wrapped by RH Customs Rods. Two-piece 50/50 split, 1-3 oz. rating that "Bombs" lures out there......this rod can also toss 1/2 oz. bucktails with no problem..... Interested in the S8. How’d you like it? I understand it’s a pretty stiff, fast action rod. Would you ship to Long Island and if so, how much? any pics of wraps, grip, etc.? No Bait. No Barbs. No Buckets. Link to comment Share on other sites More sharing options...
yogiiiboy Posted May 11, 2021 Report Share Posted May 11, 2021 2 hours ago, Stripsettter said: Interested in the S8. How’d you like it? I understand it’s a pretty stiff, fast action rod. Would you ship to Long Island and if so, how much? any pics of wraps, grip, etc.? Very fast action.....but i found that it could do alot more than previously thought. Again, although not optimal, i was able to work 1/2 oz. bucktails and metals just fine. I paid over $500 for the rod and am willing to let it go for $425 shipping and handling included. This rod is basically new only used 4, 5 times at the most. I can get some pics to you in the next day ........ i'm currently away but should be back home tonight............ Link to comment Share on other sites More sharing options...
yogiiiboy Posted May 16, 2021 Report Share Posted May 16, 2021 (edited) Here are some pics of my custom 11’ CTS S8. Hope pics are ok as my phone needs to be updated. Rod has a handle length of 24” from butt to middle of reelseat. Let me know if you have any additional questions. Edited May 16, 2021 by yogiiiboy Link to comment Share on other sites More sharing options...
Recommended Posts