Jump to content

VS Quad Seal size

Rate this topic


PI Guy

Recommended Posts

That's exactly what I plan on doing, just didn't know if anyone knew offhand what size they were. Thinking either a 9 or 10.

l miked out the shaft on the VS150 .2175 = 7/32=.2188 the would fall into the quad part # 9, but l have 2 new VS 150 OEM quad seals part # CRQ3 and the dimensions are close to the part #10.

l just redid my 150 with the OEM seal that l had, OEM mikes out to the # 10, have #9 quad seals to small, they were given to me 10 years ago a friend had them at work.

Hope that helps.

 

Look at page 4-18 it doesn't give full dimension.

http://fishermansheadquarters.com/PDF/Van-Staal_Reel_Parts_List_2014.pdf

Edited by LB
Link to comment
Share on other sites

Seal number from Mcmaster is 011 , i have them here in my shop and they work great . 8.00 for a hundred . Good Luck

Dave is the 011 seal is for the VS100/150, l'm asking because 100/150 shaft diam. is only .218 l know O rings can be compressed some for a tighter fit. also do you have a VS200/250 if so what quad seal number are you using from McMaster Carr,

l do a lot VS150 and 250s for my friends and l have a McMaster 20 min. from my house.

Link to comment
Share on other sites

Dave is the 011 seal is for the VS100/150, l'm asking because 100/150 shaft diam. is only .218 l know O rings can be compressed some for a tighter fit. also do you have a VS200/250 if so what quad seal number are you using from McMaster Carr,

l do a lot VS150 and 250s for my friends and l have a McMaster 20 min. from my house.

LB , The Mcmaster number for the 200 and 250 is the 011 seal , i am not sure about the 100/150 . I would pull the seals carefully and take a accurate measurement for the inside and outside dia dia for the 100/ 150 .

Link to comment
Share on other sites

LB , The Mcmaster number for the 200 and 250 is the 011 seal , i am not sure about the 100/150 . I would pull the seals carefully and take a accurate measurement for the inside and outside dia dia for the 100/ 150 .

Dave have #009  quad from McMaster to small it fits the shaft but floats in the pinion assembly slot, so for your info #010 is for the 100/150, will call McMaster tomorrow and see if l can get some samples #010 & 011. 

Link to comment
Share on other sites

the web is very powerful and google help see pictures:

 

 Van Staal Part# ORR10 O-RING, .239 INCH ID X .070 IN Fits VS100, VS150,VS150L

The part we are talking about is a quad seal not O Ring if you are following this tread.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to register here in order to participate.

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...