Sign in to follow this  
Followers 0
DANe

Cork rings glue

Rate this topic

3 posts in this topic

30 minute epoxy should work fine. Two suggestions though:

 

- Make sure to use a cork clamp to tightly clamp the rings together while the epoxy glue dries.

 

- Let the glue cure for at least 48 hours before sanding down the rings.

 

Al

Share this post


Link to post
Share on other sites

 

 

BTW:

 

I did call the supplier for the 10.5 foot fly rod blank and they suggested that I start 4.25 inches from the tip and continuing increase the spacing from guide to guide down along the blank. They also suggested that the last stripping guide should be a couple of inches beyond my longest reach when stripping in line (approximate 28 inches to start with). This will give a starting positions for the guides and I should adjust according.

 

 

Thanks Al

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to register here in order to participate.

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.