Sign in to follow this  
Followers 0
JoeB

What's on the bench?

Rate this topic

15 posts in this topic

I haven't seen oe of these threads in a while, so I figured it would be nice to hear what others are working on. Myself, I just finished my first two rods, and am working on #3. I CAN'T STOP!! wink.gif

 

-Lami GLB 841L (spinner...swwweeettt stick)

-Lami GLB 841M (conven....my first that has some flaws but it was a great learning experience)

-Lami 8'6" Triflex (conven...just started)

 

Still have a GSB1202L sitting naked right here, and another Lami steelhead blank (not for me wink.gif ) on the way. Me heart.gif Lamiglas. biggrin.gifbiggrin.gif

Share this post


Link to post
Share on other sites

Whats on the bench??? Three ,10 yr old Lami "do-overs", stripped and ready for thread...10 empty beer cans ( half of which are upsidedown with set two ton epoxy in the "mixing basin")...bits of masking tape that no longer sticks...a sharp knife... a quilting book...an 1889 Julius Von Hoffe reel...and The Who..."Live at Leeds" on the stereo....LOUD..Sincerely, RT...you asked!!!. hammer-time.gif

Share this post


Link to post
Share on other sites

1 Lami 136-2F

2 glb 84-1L

1 custom conventional fluke rod for the Shakey auction (first coat of finish is drying as I type.

1- Calstar 196-6

1- Calstar 660 XXH

1- Calstar 660 H

1- Calstar 665 XH

1- GUSA Wahoo (coming soon)

1- Gusa 85 Mega Mag (coming soon)

#4, #7, #9, #12 fly rods

1 Loomis 7' 40 lb mystery blank Had it too long and forgot what it is eek.gif

1-7' light spinner

1- All Star 6.5' light spinner

1- All Star RTS 5130 #30 lb E-glass trolling rod (stand up special)

I think that is just about it!

CD

Share this post


Link to post
Share on other sites

btw

i have a old fenglass LB 966 i don't know

what to do with

anyone interested in it?no shipping,can meet

in central jersey

i'm thinking around $60

let me know

Share this post


Link to post
Share on other sites

whats on the bench... lets see...

 

lami SB1363M-2 cut to 14tip and 11'

conventional surf rod to match avet sx.

lami 1213M cut to 8'6" from the butt.

conventional bridge bucktail rod to match a squiddah.

lami C6909 cut to 14tip and 7'9"

conventional cod rod to match torium30

lami CGBT 96H

conventional cod rod to match torium30

calstar graphiter765M

acid spiral roller rod to match avet EXW 4/0

 

oh, and also a huge pile of unpaid bills, scrap paper, notes, measurements, drawings, pencils, pens, brushes, tools and measuring tapes, about 12 ashtrays, 6 packs of skittles, 3 half empty 2 litre bottles of soda, mental accuity and supplies, epoxies, plugs, krylon, a fishing journal i havent made an entry in in over a year, and climbing through the pile knocking everything over a giant white 20lb cat.

now whats UNDER the bench... about 3 miles of thread in 2-6" pieces, plus about 10 rols of masking tape in 1/2-3inch pieces.

Share this post


Link to post
Share on other sites

CD: yup, probably. lol. seriously he's the only reason i flame my wraps before epoxy goes on. thankfully he's white and i dont use CP, so if one slipped by it wouldnt stand out too much...

Share this post


Link to post
Share on other sites

Another Rainshadow 1208 -spinner

Lami 1321M that I'm extending about 2 feet...gonna pair it with a tricked out CT mag and try and throw some lead past 600ft (hopefully a few will fly before I birdsnest my way through an entire bulk spool of mono!)

 

biggrin.gif

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to register here in order to participate.

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.