Sign in to follow this  
Followers 0
GREG'O

guide spacing for gsb1321m

Rate this topic

2 posts in this topic

I would like your suggested spacing for bsvlgs 50,40,30,25,20,16 with an 11/64ths tip with a 16 ring. The gsb1321m will be used with a 6500ss penn. The reel seat front end is 24" from rod butt. Thanyou and sorry to hear about your back.

 

 

Share this post


Link to post
Share on other sites

Greg,

 

This is an educated guess, since I only use the Fuji highframe spin guides:

 

Place the #50 stripper 40 inches from the face of the spool.

 

Place the #16 guides 8 inches from the tip measured from ring to rong.

 

Space the remaining guides in 1-1.5 inch increasing increments as you work from the #16 to the stripper guide.

 

 

Tape the guides in place and test cast. Adjust the position of the stripper guide until all line slap has stopped. Then adjust the position of the remaining guides.

 

You may need to add a second #16 guide to achieve a good stress distribution across the length of the blank.

 

Al

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to register here in order to participate.

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.