Getting a flat on the beach or uneven terrain

[TBD]

This past weekend had a flat on uneven gravel surface. Didnt feel like the mickymouse jack that came with the Wrangler could do the job so I paid to have it done in more than just cash.

 

Anyone know of a good jack that wont take up much room? Also how do you guys prepare for the worse while driving on the beach?

 

TBD

[aweiss4428]

obviosly if the bead is broken you most likely won't be able to re-inflate, but if the bead isn't completely broken you might be able to inflate the tire if you have a GOOD compressor.

 

some guys like these hi-lift jacks. gotta e carefull tho cuz if you don't do it exactly right you could get hurt.

 

I would prefer a good, hi lifting bottle jack, of course with a good jack board.

bottle is going to take up the least room.

[jbt114]

Rob... My kids bought this for me for X-mas. Plug it in the cigarette lighter and away you go. I had to use a short piece of 4x4 to use between the frame and the jack.

 

Put it on the jack board and raise the vehicle...

 

Google "electric car jack".

 

Works great.

 

Chris

[99ways2die]

...and how is this (above) different, from his OEM jack...aside the obvious?

 

 

 

Weiss wrote that a lot of poeple like/use hi-lifts. Other options include bags; bottles work as well. The biggest trick inthe wild is to get a firm base and survive the ordeal. Each solution will present its very own advantages and probably equal amount of concerns/disadvantages.

Choose wisely....and live to tell the tale.

-99

[Metallica]

there is this jack that was previously mentioned here before its called the titan air jack. it is basically an inflatable heavy duty bag that u place under the car and with the exhaust from the car you inflate the bag. preety cool, youtube has video's showing how it works. lifts the car preety high, higher than most jacks will

[toyota]

there is this jack that was previously mentioned here before its called the titan air jack. it is basically an inflatable heavy duty bag that u place under the car and with the exhaust from the car you inflate the bag. preety cool, youtube has video's showing how it works. lifts the car preety high, higher than most jacks will

 

ive seen this in action and it is awesome...i own a high lift, but absolutely hate using it...for working on the truck..

[brianbutler10]

if you want to save space, then go with a bottle jack.....

 

make sure to carry some sort of board with you to put whatever jack on top of when it comes to sand

[Mudpro]

Alternative to OEM or bottle jacks:

 

Hi-Lift - Obviously takes up a lot more room, but the most cersatile tool for off-road recovery you can pack. If you are running a stock rear bumper, there are easy to install brackets that will let you carry the jack outside of the vehicle. If you are running a lift, that usually means bigger tires, and that measn a beefed up tire carrier; many of those have attachment points for a Hi-Lift jack. If you are going to do much off-roading, this is the best investment you'll ever make.

 

[longcaster]

This is what I carry, it will lift just about anything. I carry a couple pieces of plywood to prevent vehicle underbody sharps from puncturing.

 

 

BUSHRANGER LAUNCHES A

BETTER AND SAFER EXHAUST JACK

February 28 2005

 

Innovative Australian off road accessory company Bushranger has designed and launched a new generation of exhaust jacks making one of the most practical and useful off road tools even better.

 

Bushranger's new X Jack features a triple layer lifting surface and a hard core insert to ensure better durability and greater stability for raising vehicles on unstable surfaces such as sand, mud and loose gravel.

 

The new X-Jack is a 21st century take on a concept pioneered in Australia in the 1970s but using the latest materials and technology.

 

Additional safety features include an easy to use inflation and deflation system that allows the user to remain at a safe distance while the vehicle is being raised or lowered.

 

X-Jack is the first air jack to feature two way inflation utilizing either the vehicle's exhaust or a portable 12 Volt compressor such as Bushranger's Max Air or ProAir.

 

According to Bushranger national sales manager Evan Black the company analyzed every aspect of previous units and set about designing and developing a safer, more durable and easier to use exhaust jack.

 

"Off roaders, farmers and ******* have to use exhaust jacks to help lift vehicles in bogs, sand or mud often at the least convenient times when safety and stability are vital," said Mr Black.

 

"Our engineers have incorporated design features such as additional side curtains to assist in puncture prevention, a triple layer reinforced top for more stable lifting and unique triangular feet on the bottom for better grip," he added.

 

"We also realized that sometimes it is not possible to inflate the jack using the vehicle exhaust as it is not always convenient or safe, so the X-Jack was also designed to be used with a 12 volt compressor.

 

"This innovation has taken the evolution of air jacks to a new level and it is an example of why Bushranger has maintained its status as an industry leader for so long," he said.

 

X-Jack features a 750mm lift and is rated at four tonnes GVM.

 

The new X-Jack comes in a heavy duty storage bag and includes a protective mat, a puncture repair kit, two filler tubes, a pair of leather gloves and laminated operating instructions.

 

Available through all leading automotive accessory and four wheel drive equipment shops the Bushranger X-Jack is covered by a full one year no fuss warranty.

 

Bushranger is a division of Kingsley Enterprises a leading Australian manufacturer of automotive and four wheel drive accessories for more than a quarter century.

 

"We applied some logic and lateral thinking to a great idea and came up with an even better one that will make it easier for people to lift vehicles when they need," said Mr Black. Seattle, WA, ARB 4x4 Accessories, Australian based four wheel parts manufacturer was honored with the Best New Exterior Accessory Product award for ARB Bushranger X-Jack at the 2005 Specialty Equipment Market Association (SEMA) trade show in Las Vegas, Nevada.

 

 

I think it is allright to post this, as it only has the company name, but no way to get ahold of them without further work. If I am wrong get rid of the offending parts.

[StormCaster]

I use the hi-lift jack with all the accesories, but it really takes up a lot of room. If you are going to get one then get the jack guard case.

[riarcher]

Hi-lift.

I've one in the Cherokee. Fits nicely under the rear seat.

However, If I really need it I need to yank the seat out for it.

Obviously, I don't use it much (havn't yet). nice having it though if I need it.

It's much more than just a jack too.

[Backbeach Jake]

Factory jack on an 18x18 square of 3/4" plywood.

[squidlips]

2 ton mini floor jack at Sears, even comes in a plastic carry case. That plus a piece of plywood and you are golden.

[Duane S]

This is what I carry, it will lift just about anything. I carry a couple pieces of plywood to prevent vehicle underbody sharps from puncturing.

 

 

BUSHRANGER LAUNCHES A

BETTER AND SAFER EXHAUST JACK

February 28 2005

 

Innovative Australian off road accessory company Bushranger has designed and launched a new generation of exhaust jacks making one of the most practical and useful off road tools even better.

 

Bushranger's new X Jack features a triple layer lifting surface and a hard core insert to ensure better durability and greater stability for raising vehicles on unstable surfaces such as sand, mud and loose gravel.

 

The new X-Jack is a 21st century take on a concept pioneered in Australia in the 1970s but using the latest materials and technology.

 

Additional safety features include an easy to use inflation and deflation system that allows the user to remain at a safe distance while the vehicle is being raised or lowered.

 

X-Jack is the first air jack to feature two way inflation utilizing either the vehicle's exhaust or a portable 12 Volt compressor such as Bushranger's Max Air or ProAir.

 

According to Bushranger national sales manager Evan Black the company analyzed every aspect of previous units and set about designing and developing a safer, more durable and easier to use exhaust jack.

 

"Off roaders, farmers and ******* have to use exhaust jacks to help lift vehicles in bogs, sand or mud often at the least convenient times when safety and stability are vital," said Mr Black.

 

"Our engineers have incorporated design features such as additional side curtains to assist in puncture prevention, a triple layer reinforced top for more stable lifting and unique triangular feet on the bottom for better grip," he added.

 

"We also realized that sometimes it is not possible to inflate the jack using the vehicle exhaust as it is not always convenient or safe, so the X-Jack was also designed to be used with a 12 volt compressor.

 

"This innovation has taken the evolution of air jacks to a new level and it is an example of why Bushranger has maintained its status as an industry leader for so long," he said.

 

X-Jack features a 750mm lift and is rated at four tonnes GVM.

 

The new X-Jack comes in a heavy duty storage bag and includes a protective mat, a puncture repair kit, two filler tubes, a pair of leather gloves and laminated operating instructions.

 

Available through all leading automotive accessory and four wheel drive equipment shops the Bushranger X-Jack is covered by a full one year no fuss warranty.

 

Bushranger is a division of Kingsley Enterprises a leading Australian manufacturer of automotive and four wheel drive accessories for more than a quarter century.

 

"We applied some logic and lateral thinking to a great idea and came up with an even better one that will make it easier for people to lift vehicles when they need," said Mr Black. Seattle, WA, ARB 4x4 Accessories, Australian based four wheel parts manufacturer was honored with the Best New Exterior Accessory Product award for ARB Bushranger X-Jack at the 2005 Specialty Equipment Market Association (SEMA) trade show in Las Vegas, Nevada.

 

 

I think it is allright to post this, as it only has the company name, but no way to get ahold of them without further work. If I am wrong get rid of the offending parts.

 

 

I bought one of these this past summer. Fortunately, the only time I've used it was to test it in my driveway.

 

It does work as advertised. I used a rubber floor mat on top for that test, to make sure it didn't get punctured by something on the undercarriage. I'd read that suggestion somewhere. I also have a 2' x 2' peice of 1/2" pressure treated plywood that I usually throw in the back on a beach trip.

[Lbifisherman429]

how do the high lift jacks work

 

and what did th exhust jack cost