Sign in to follow this  
Followers 0
Thumper

Anchor recomendations for a 21 cc

Rate this topic

11 posts in this topic

Just backed in a Hydra-sport 212. Need basic duty anchor. Cape Cod waters. Thinking about this:

 

http://www.boatersworld.com/product/157160136msk.htm?bct=t13037503%3Bcidocking%3Bcianc hor

 

But is 3/8 enough? Is 8# enough or go to 13#.

 

I've used "Danforth" types my whole life so planning on this style but currious as to what you guys think is the right combination.

 

Also what about the "backup"????

 

cwm15.gif

Share this post


Link to post
Share on other sites

I think you can do better buying the pieces separately.

I would go with the 13#, and at least 6' of chain, and 300' of 3/8 line.

Share this post


Link to post
Share on other sites

Not familiar with depth of water you will be operating in, our Power Squadron teaches a ratio of 7/1 for anchor line in Boat Smart course, I do agree that you can beat the price you posted by buying individually and I do feel you should have a back up anchor ,I have 19cc and have 13 lb on bow 6ft chain on 275' 3/8 line and Keep a 10lb in five gallon bucket with 100' of 3/8 line w/ 5ft chain, Water here is Shallow , Our Local Wal Mart has real good boating dept with all one usually needs,Yes I know many not fond this place ,how ever nearest Boaters World store is 65 mile one way. Sounds like Nice Boat

Share this post


Link to post
Share on other sites

IMO, the Fortress aluminum anchor is the best Danforth anchor on the market. I use the 4 lb FX-7 for a 23' and she holds extremely well, including dark soft mud. This anchor can be had for about $80 - don't pay West Marine $125 for it.

 

Use at least 7/16" rode, as it is much more forgiving on the hands, even though you don't need anything more than 3/8" for your boat.

 

Chain is very important to get the anchor to set when drifting. Get at least 8-10' of 3/8 galvanized from Home Depot. Don't buy it from a marine supply, you just pay more for the same thing.

 

As far as scope goes, 7:1 is what you need to overnighting - but you won't be doing much of that in 21 footer. For fishing, even in 3-5 knot rips, all you need is about 3:1 and more often than not, much less. I keep 300' of 7/16" for my primary anchor in the bow locker. For backup and possible emergency I keep 600' of 3/8" and a second Fortress anchor in a milk crate stored in the console.

Share this post


Link to post
Share on other sites

Great information, any suggestions for best anchor line prices online?

 

Again many thanks, I'll splurge for the more expensive but less weight fortress.

 

J

Share this post


Link to post
Share on other sites

Get yourself a Bruce anchor or one of the knock offs now made of the bruce design. They hold get with out using a lot of scope, for anchor line use a good heavy double braid nylon, its EZ on the hands when pulling and it flakes down like snot into a small box or anchor locker.

Share this post


Link to post
Share on other sites

Alaskasteve,

 

Bruce anchor would be my first choice for a larger boat that has a pulpit or storage space for it, but for a 21 footer its overkill.

Share this post


Link to post
Share on other sites
Alaskasteve,

 

Bruce anchor would be my first choice for a larger boat that has a pulpit or storage space for it, but for a 21 footer its overkill.

 

I've got a hydrobubble which is a type of bruce/plow on a 20ft boat. It works very well, especially in areas of sand/mud/weeds that normally fouls the flukes of a danforth style. It sets fast and doesn't have movable flukes to foul.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to register here in order to participate.

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.