Stripped Gear

BST Users
  • Content count

    187
  • Joined

  • Last visited

    Never

About Stripped Gear

  • Rank
    Senior Member

Converted

  • Interests (Hobbies, favorite activities, etc.):
    Spin & Fly Fishing, Fly Tying, Conventional, Fresh & Salt
  • What I do for a living:
    Retired
  1. George is my Brother in Law, a happy go lucky guy. He always reminded me of the kids story of The Pied Piper, He loved all of his neices and nephews very much and they really loved him too. He thought nothing of driving from Dorchester to Carver to take four of my grandkids out to lunch. I have many good memories of George, in his younger years he liked to work on cars and I being a mechanic was his information center. He would often call me for assistance with one of his projects and I would make the trip to Dorchester to work with him and had fun doing it with him. I will miss him and his humor very much. REST IN PEACE GEORGE. I BELIEVE THAT THERE IS A SPECIAL PLACE IN HEAVEN FOR YOU TO BE WITH BOBBY AND MATT.
  2. Purplenoon, I use bulk auto radiator hose which can be purchased at local auto parts stores. If you can bring a sample of the size that your tubing is and pick a size that is tight or as has been suggested and use clamps to secure it. Ypu can also cut slots in the top of them for your spinning rods to keep them from turning in the tube. Good luck, Stripped Gear aka Bob
  3. Hi Karl K, No need to look for his # I think I know where you are talking about. Thank you for your efforts. Stripped Gear
  4. Hi Tim, Thanks a lot, everything worked out fine. Stripped Gear, aka Bob
  5. Karl F, Thanks for the information Could you send me a pm with the location of this welder in Lakeville? Thanks Tim may be changing my user name back to my original user name Stripped Gear. ( just in case there is a problem getting my e-mail address)
  6. Hi Tim, Thanks for the option, I will change the name back to the original user name. Stripped Gear.
  7. Hi Tim, My original name was Stripped Gear on 9/27/2000, It somehow evolved into Strippedgear on 3/35/2002. Thanks for asking
  8. I have a 2000 Ford Explorer SLS. I am looking for a front cooler rack receiver to accomodate my 120 quart cooler which has 3 rod holders on each side. My previous 94 explorer receiver will not fit my present vehicle. This receiver was built by someone more talanted than I am. Any information regarding this problem will be greatly appreciated. Thanks a lot, Strippedgear, aka Bob
  9. Several years ago on one of the cape beaches I aired down to 15 pounds on my 94 Ford Explorer, put it in 4 wheel high as I normally do and headed down to the beach. While driving to my spot I hit a soft spot and the truck bogged down. The first thing that I tried to do was back out of it in reverse because the gear ratio is lower in reverse but I still could not pull out so fishing pal gets out to see what was going on and he tells me that my front wheels are not moving so I tried re-engaging the 4 wheel drive into high and then low but nothing was moving. I cleared an area under the truck and had my freind active the low and high buttons but the electric motor that engages the tranfer case was not working. What a bummer to say the least. I was very fortunate that my nephew was fishing the same beach and after we had finished fishing and we were ready to go home he was able to tow me off the beach with the equiptment that we are required to have in the truck. The replacement motor for the four wheel drive looks a lot like a windsheild wiper motor. Tight lines, Strippedgear aka BOb
  10. Hi Bob, I got your pm. Check your pm's for my message. Strippedgear
  11. I just got word this morning that Angler (Carl) has been transfered to Cape Heritage Nursing Home/Rehab Facility. I do not know any details at this point but I assume it has to do with the compression fracture that he has in one of the vertibrae. I am told that the facility is located in the vacinty of the Stop and Shop that is near the Canal. If any further information becomes available I will repost it. Strippedgear aka Bob
  12. I too enjoyed having breakfast with some of the guys. It was a pleasure meeting Skitterpop. Backbeachjake, Newcaster, L-dog, Montyfishing. I have met Tagger before, Angler1 I have known and fished with for many years and it is always a learnig experience talking with Stan Kuzia. Loking at all the awesome plugs that were made by some very skilled people that Skitter brought with him was enough to make me want some of them. Tight lines to ya, Strippedgear,aka Bob
  13. Joe G, What did you do to deserve all this attention? I just want to know so that I don't make the same mistake and suffer the same consequences as you. Strippedgear
  14. Hi Skitterpop, I have not been to a get together since a couple of guys were getting together at the local DD's. It's time to see some of the people That I read about on the site. See you there.
  15. Angler #1, Except for an occasional trip to the canal in my teen years I didn't really start to fish there until I got out of the service in 1959. That was a time before the regulation of the herring run. A time when most people built a wood frame herring cage covered with hardware wire, a time when we could get as many herring as we needed right at the entrance to the run and with a rope attached to it we would float it to the area where we wanted to fish. A lot of guys at that time also walked the herring along the canal of course there were less people fishing then. Then my family started to increase in number and I found that I had to work 2 jobs so that my wife could stay home and raise the kids. Needless to say it put a giant kink in my fishing time for quite a few years. However, now that I am retired I have the rest of my life to fish there. Strippedgear aka Bob