infernovip

Users
  • Content count

    3
  • Joined

  • Last visited

About infernovip

  • Rank
    New Member
  1. I have hope someone from Penn will read this and in future they will improve some tech. 1. So I'm writing abut putting by PENN: Line Roller Bushing instead of ball bearings to reels like: Sargus, Battle, Pursuit and many more. And the worst thing is that they put this type of brushing that is impossible to exchange with ball bearing. Because of that on line roller is to much tension with lures and braid is more twisted. And only heavy lures can force line roller to move, for most of times this line roller doesn't do it's job and didn't move at all. To make it works better you need to oil it all the time and when you do this during fishing this oil coming from brushing true line roller to braid so in the end you have the line covered with oil. And this brushing rubs against the element on which it is located, it causes damage that causes bigger problem line roller to move. For me it is one big mistake and because of that i sold Sargus II and i didn't buy any new Penn reel under spinfisher VI... but i really wanted to do this... I have hope before you sell something it is tested so i didn't know why someone let it happen. 2. Gear ratio - to heavy inshore fishing is important lower gear ratio, it really helps and the fishing is more comfortable and now almost all PENN rells have high 6.2. In this year finally shimano listen to the anglers and made stradic with few gear ratios that is available worldwide. Penn are you next? That all my sorrows. Good day.
  2. I wrote post about that in other topic but today i decide to write own topic here. I have some question about gears because I was 100% sure that battle II inside have this same gears like conflict. Here is part list for battle II 4000: 407-BATTLE BTLII4000.pdf Here is part list for Conclict 4000: CFT4000 REV 1 1292952.pdf Now look part number 8 - main gear... should be 100% this same but in photo here(battle II): http://www.stripersonline.com/surftalk/topic/619328-picture-heavy-review-penn-battle-ii-4000/ is other type of gear. * Now please someone from PENN for answer, Why are there such differences?
  3. Thank you for the inside look to battle II. Now I have some question about gears because I was 100% sure that battle II inside have this same gears like conflict. Here is part list for battle II 4000: http://s7d5.scene7.com/is/content/purefishing/PENN/Manuals%20-%20New/407-BATTLE%20BTLII4000.pdf Here is part list for Conclict 4000: http://s7d5.scene7.com/is/content/purefishing/PENN/Manuals/CFT4000%20REV%201%201292952.pdf Now look part number 8 - main gear... should be 100% this same but in your photo is other type of gear. Look all to topic about conflict 4000 service, look on photos: http://******.com/index.php?topic=10227.0 Now please someone from PENN for answer, Why are there such differences?