-
Posts
5,581 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Posts posted by HellRaY
-
-
nice theme. excellent work together with the ace of spades.
yellow and white are the hardest thread to work with.
-
P.S.
I bought a two piece spinning rod rod from a small shop 10 years ago that I didn't use until a year ago. I wondered why my casts tended to go off 20 degrees to the right. When I had the bright idea to check the spine I discovered the guides were placed 20 degrees off where they should have been according to my spining test. I have not yet undertaken the project of correcting the guide placement. I just put the tip section on with the guides canted to that angle when I (RARELY) use the rod and can cast straight with it.
baloney
-
I am assuming you are new to rod design and building.
See if the guides or the reel seat best line up with the spine (some rods will have several spines, and with most spinning rods the guides should be on the side of the rod that faces the floor when you do the spine-finding procedure.
great idea.
what if the spine is to the side of the reel seat and guides, now you have to redo the entire rod.
spine is old wives tale meant to sell rods to the uninformed customers.
at least you didnt say spline.
-
how do you know the reel seat is misaligned and not the guides?
maybe the guides are not aligned to the reel seat?
confusing.
-
unfortunately i have not found a tip that is a size 7.5 tube with a 6 ring so i have a size 10 ring.
how many do you wanna buy?
-
that's a reversed mn
-
Where did the "Brokeback" name come from? Fuji never mentioned that.
Jim are new to billy?
and i bet that name's gonna get stuck. hahahahah
Fuji Brokeback Mountain Titaniums
LOL, LMAO, ROTFLMAO.
-
sw1089 is a broomstick. it wont handle lighter things well, even the 1088 takes about 3-4oz to load nicely.
-
if you're doing it yourself and have nothing to do, perhaps it is worth it.
but having someone do it isn't.
labor to build a rod $200.
labor to strip a rod $200.
you're looking at $400 to rebuild the rod and that's labor alone.
-
I'm sorry, why is this funny? I'm not a rod builder. I was told that I needed 20mm?
Do they not make that size?
no
-
-
I need size 20
lol
-
Lee, I'll get you a new sample from a different spool on the fireline 14lb.
-
diameter?
can't wait for the fireline crystal, i seen some of your results and they are quite impressive strength to diameter ratio.
i think all we need now is fireline crystal 6# to cmplete the fireline line up.
-
that's not me, that's a client, so i have no idea what lb test he was using.
tell you this though, i've built using TKLSG 20mm and the client uses 40# spiderwire ultracast which breaks at around 60# and the guides held up well.
-
don't listen to fuji. you can read about theory and listen to all BS advise from people with no experience building the same rod til your nose bleed or you can do it and prove their theories wrong. building a rod is not rocket science any moneky can do it, other monkeys jsut complicate things with their BS theories.
-
-
there'ss probably 8 more in my webpage built from the past year 2016.
rods were built for daiwa saltiga 4000 with 20# ultracast all the way stella 8000 with jigging master 16k spool using 60# jerry brown hollow core
Jim Ising saw this in person, these has single ft size 8 runners.
blackfin tuna was caught on the same rod.
pic submitted by customer
-
99% of CCW holders i've met in florida dont know how to use guns properly, can't clear an FTE, can't hit the barn from 10 yards out, but they shoot in the range 5x in 10years and that skill makes them feel safe.lol
-
if you have bad credit scores, start fixing it now before dodd frank is reapealed.
if you have JDB junk debt buyers chasing you, negatives on your credit report keeping your score low and prohobiting you from getting 0% intesrest rates on auto loans, mortgage, loans etc... start working on it now and hopefully you'll get it done before dodd frank is repealed.
EDIT: with regards to harassing phone calls and all other JDB and CA violations, it is $1000 per violation, at least you make money before dodd frank is repealed.
-
american homes have an average debt of 16k.
the dood frank blankets the CFPB consumer financial protection bureau, FDCPA fair debt collection practices act, FCRA fair credit reporting act.
so if you have unpaid bills, bills on collections, charge offs, heavily indebted, goodluck.
fix your credit a.s.a.p before it is repealed.
-
discover promo, 10% cash back on starbucks.
-
it is the newest one, 2015.Denny, which year is the saltiga 4k. What ia your take on it compare to the stella?
-
massive bill from some medical procedure my kid had like 4 years ago that insurance rejected and they're trying to collect from us. good luck
PM coming.
Shaded Explosion EVA grips
in Rod Building Forum
Posted
very nicely done. you've been in your game lately.
alot of work, i wont do it for $150, perhaps about $300 then i'll just buy the grip off you. lmao