rayndogg19 Posted September 23, 2014 Report Share Posted September 23, 2014 Hello I have a few plugs I want to finish in Bone, but have no idea how to get that shade of white. is it a custom mix, antique white, ivory?????? please help!!! thanks Rene Link to comment Share on other sites More sharing options...
black talon Posted September 23, 2014 Report Share Posted September 23, 2014 There are a couple ways to come up with bone. The easiest way is, white with a little gold mixed in. You just have to figure out how much of the gold to mix in. rock out with my plug out Link to comment Share on other sites More sharing options...
linesider69 Posted September 23, 2014 Report Share Posted September 23, 2014 I spray a light yellow then pearl white over the top. I will get plenty of sleep when Im dead! Link to comment Share on other sites More sharing options...
JGH31 Posted September 23, 2014 Report Share Posted September 23, 2014 What kind of paint are you using spray cans, airbrush, something else? Brand may help too. Link to comment Share on other sites More sharing options...
black talon Posted September 23, 2014 Report Share Posted September 23, 2014 Airbrush rock out with my plug out Link to comment Share on other sites More sharing options...
Woodpecker Posted September 23, 2014 Report Share Posted September 23, 2014 A good paint shop...for household type paint, will have universal colorants.... same stuff they add to the gallons you buy when you paint your living room. Not too expensive and gives you lots of flexibility. It takes a little time but mixing custom colors is not too hard if you read up on the basics. Most of the "off whites" on a color chart have maybe 3 or 4 drops of a pigment added to a full gallon of white base so it goes a long way. Bone is probably in the yellow ochre range  and maybe a little black so it covers better. Link to comment Share on other sites More sharing options...
rayndogg19 Posted September 24, 2014 Author Report Share Posted September 24, 2014 thanks for he help guys. I use airbrush, but if I can find the right color in rattle would be great seeing I want make them all one color. Â Â thanks again,Rene Link to comment Share on other sites More sharing options...
Kima Posted September 24, 2014 Report Share Posted September 24, 2014 I just used Sand color rustoleum. It's a little darker than normal bone lures, but the fish didn't care. Link to comment Share on other sites More sharing options...
Chunkah Posted September 24, 2014 Report Share Posted September 24, 2014 Krylon almond is a very good bone color. Link to comment Share on other sites More sharing options...
surfflyfish4stripers Posted September 30, 2014 Report Share Posted September 30, 2014 Thinned white pearl and a drop of brown, adjust as your like. dave In order for you to be respected you have to respect yourself first.Be thankful for everything you have. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to register here in order to participate.
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now