StripersOnline › SurfTalk › How-To Forums › Reel Maintenance and Repair › schematics for vintage penn 350 leveline?
New Posts  All Forums:Forum Nav:

schematics for vintage penn 350 leveline?

post #1 of 5
8/26/09 at 11:19am
Thread Starter 
hey, i could use some assistance finding detailed schematics for an old leveline. it was my great-grandads & i intend to do some light trolling with it.

the winding/grooved line-guide mechanism wasn't staying engaged & i've disassembled the reel to try to fix/clean it (incredibly clean BTW), & of course in my carelessness i've now reached a chaos of minute springs & such . it's actually not that bad, but i could definetely benefit from some schematic information if there's any to be had.
Reply
Reply
post #2 of 5
8/27/09 at 7:38pm
Hi, when you say grooved mechanism, is that a spiral bar? If it is, you can goto penn parts, a sponsor upper RH corner this board, and look under the level winds for the 350M. In the conventional reels section.
Reply
Reply
post #3 of 5
9/2/09 at 11:47am
pennparts has them on their site.
Reply
Reply
post #4 of 5
9/3/09 at 10:35am
Yes, as I indicated above.
Reply
Reply
post #5 of 5
9/22/09 at 2:29pm
Thread Starter 
yeap, spiral bar. thanks. probably would have been easier to just use a finger as a line spooling guide- everything else worked fine.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reel Maintenance and Repair
StripersOnline › SurfTalk › How-To Forums › Reel Maintenance and Repair › schematics for vintage penn 350 leveline?