PENN Fishing

SSV upgraded CNC gear sets now available for purchase

88 posts in this topic

Posted (edited)

SOL,

 

The CNC machined gear sets are now available for purchase.   A few ways to have them installed:

 

*Call our Customer Service line to purchase and install yourself.  Part # is the 7 digit number next to the model.

 

Parts Customer Service

Monday thru Friday
8:00 A.M. - 5:30 P.M. EST
Phone: (800) 892-5444

 

SSV3500 1415298 - $55.40 + shipping & taxes (Machined aluminum gear, brass pinion)

SSV4500 1415298  - $55.40 + shipping & taxes (Machined aluminum gear, brass pinion)

SSV5500 1415301 - $63.75 + shipping & taxes (Machined aluminum gear, brass pinion)

SSV6500 1415315 - $63.75 + shipping & taxes (Machined brass gear, brass pinion)

SSV7500 1415304  - $74.15 + shipping & taxes (Machined brass gear, brass pinion)

SSV8500 1415304 - $74.15 + shipping & taxes (Machined brass gear, brass pinion)

SSV9500 1415307 - $74.15 + shipping & taxes (Machined brass gear, brass pinion)

SSV10500 1415307 - $74.15 + shipping & taxes (Machined brass gear, brass pinion)

 

The SSV5500 and SSV6500 gear sets are inter-changeable.  What does this mean?   If you have an SSV5500 reel you could purchase either the 5500 set with aluminum gear, or the 6500 set with the brass gear.  Same if you have an SSV6500 reel, you could purchase either.  No other models are inter-changeable. 

 

 

*Order from one of our Preferred Parts Vendors, Scott's B&T and Fisherman's Headquarters both located in NJ.  They will have them in stock in a few days.  Contact and locations can be found here:  http://www.pennfishing.com/PENN-parts.html

 

 

If you were to purchase the kit, it would come with Main drive gear, pinion gear, 2 shims.  You would need to shim as needed and be careful not to damage any parts as this would not be covered under our Manufacturing Warranty. 

 

 

*Send your reel in and we can install the gear set for you. 

 

 

If you wish to send the reel in and are an SOL member we will perform the gear swap as follows:

$0.00 labor + cost of kit + return shipping and handling.

*This applies only if the reel is in good working order and does not need cleaning or other parts.

 

 Non Members:

$10.00 labor + cost of kit + return shipping and handling.

*This applies only if reel is in good working order and does not need cleaning or other parts.

 

When sending the reel in please note you would like the CNC machined gear kit installed, and we also need your SOL Username. 

 

Reels should be sent to:

 

Factory Service Department
PENN Fishing Tackle Mfg. Co.
3028 West Hunting Park Avenue
Philadelphia, PA 19132
(800) 892-5444

 

tony

Edited by PENN Fishing

Share this post


Link to post
Share on other sites

Thanks!  Great of Penn to do this..  

 

Was there any clarification if there is a gear set for the Live liner models?  (I also have a SSV4500 LL)

 

-TonyNJ

Share this post


Link to post
Share on other sites

Tony could they be dropped off ? Since I'm right on the other side of the bridge and if so , during what days and times ? Thanks

Share this post


Link to post
Share on other sites

If we want to send the reel in how do we pay?  Are we invoiced?  Thanks

 

Yak,

 

It would get billed just like a reel repair.  We would call for a credit card # once the kit is installed.

 

tony

Share this post


Link to post
Share on other sites

To save on international shipping costs would it be possible to buy a souped up SSV 4500?

 

Eiz,

 

I am sorry we do not sell a stock SSV4500 with the gear set already installed.

 

tony

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to register here in order to participate.

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.