Jump to content


Photo

Building furniture from cheap, big-box framing lumber


  • Please log in to reply
44 replies to this topic

#1 Belmo

Belmo
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 2,897 posts
  • Joined: Dec-27 2005
  • LocationPhiladelphia

Posted February 12 2013 - 9:53 AM

I have been trolling Ana White's website (you can find it by googling) the past few months, and the projects, and the philosophical underpinnings behind the projects, intrigue me. Ana and her minions seem to espouse going to a big box store like Homie's or Blowe's, picking through the cheap lumber there, and spinning that crappy straw into gold, via the free woodworking plans on the website. Instead of spending $1,000 on a table, you can build one yourself 90% cheaper.

For a lot of projects, this seems like probably a questionable idea: I don't know that I would want to fashion a family heirloom-type piece out of cheap framing lumber. But for some things, it seems like a great idea. Take outdoor furniture, for example, which is essentially disposable, especially if you live near salt air: the stuff is exorbitantly expensive to buy, always seems to be build like crap, and never seems to last more than 3 or 4 years. Instead of shelling out three grand at Restoration Hardware, why not spend a weekend building your own knockoff style patio table for $150? At this price, who cares if it doesn't last five years?

Has anyone experimented with this type of DIY project? I am fascinated enough by it that I think I'm going to try it this spring -- my first project will be the patio-table-with-built-in-cooler shown below (I think the idea is hilarious).

Posted Image


  • 0
  • -
These opinions sponsored by nobody.

#2 barrell

barrell
  • 5,000 Post Club!

  • PipPipPipPipPipPip
  • 5,309 posts
  • Joined: Jan-01 2001

Posted February 12 2013 - 10:57 AM

Sure it will work but I would run it through a planer and route the edges better then what was done it that photo. I would also bisket the joints and use a waterproof glue.


  • 0
  • -
BARRELL

#3 JimW

JimW
  • 5,000 Post Club!

  • PipPipPipPipPipPip
  • 10,895 posts
  • Joined: Sep-27 2001

Posted February 12 2013 - 11:02 AM

I would want to make sure the lumber is dry before starting anything.


  • 0
  • -

#4 gobigblue

gobigblue
  • 5,000 Post Club!

  • PipPipPipPipPipPip
  • 5,045 posts
  • Joined: Dec-06 2005
  • Locationunion county nj

Posted February 12 2013 - 11:52 AM

that website will keep you busy. like the others here have mentioned, buy the "premium" version of the lumber if they have one, unless your finish is going to involve any distressing or worn looks. make sure the wood is dry and straight. dont rely on her pricing or cut lists. do your own calculations. as long as you can plane or sand the crap out of the lumber you will be fine. ive built a ton of stuff already with ideas from that website (and my wife being obsessed with pinterest recently) they all came out really awesome and ive saved a ton of money (that cost savings is usually offset by the "need" to upgrade tools ;))


  • 0
  • -

#5 NickinMass

NickinMass
  • Elite Member

  • PipPipPipPip
  • 526 posts
  • Joined: May-12 2009

Posted February 12 2013 - 3:01 PM

My first furniture project used hemlock 4x4 and CVG fir 2x4 and 1x4 from the local lumberyard. I spent more time covering knots and splitsin the 4x4's with dutchmen than anything else on that project (I still have it - looking at it right now). Given the quality of dimensional lumber I see when I go to the borg (which is rare - the place aggravates me so much I only go there when I can't find another way to get what I need), I'd plan on overbuying by a lot, then leaving the material to equilibrate for a while before starting work. The majority of 2x4's I saw in the rack last time I bought any were boxed cores, which don't really like to stay straight...


  • 0
  • -

#6 Belmo

Belmo
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 2,897 posts
  • Joined: Dec-27 2005
  • LocationPhiladelphia

Posted February 13 2013 - 3:02 PM

Thanks for the input, fellas. I'm gonna give it a shot - why the hell not. I'll make sure to post here when I finish my first project.


  • 0
  • -
These opinions sponsored by nobody.

#7 Woodpecker

Woodpecker
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 1,722 posts
  • Joined: Dec-23 2012

Posted February 13 2013 - 7:10 PM


 Maybe check out a local saw mill or hardwood dealer who specializes in supplying cabinet shops or runs custom flooring and molding. Ones around here are almost half the price for dry lumber than a traditional lumberyard. They store it rough sawn but will plane and straight rip one side for a small charge. If you find the right place they may have 6/4 or 8/4 pine that is dry for not too much more than green lumber available elsewhere. A rustic or "character grade" white oak can be pretty inexpensive as well and will last a long time outdoors, especially if stained or sealed.



GL



  • 0
  • -

#8 DerrickT

DerrickT
  • Way too many!

  • 50,980 posts
  • Joined: Mar-29 2007
  • LocationEphrata, Pa

Posted February 17 2013 - 1:02 AM

There is an old guy who comes and picks thru our skid pile and only takes the skids made from rough cut lumber. He takes them apart, scraps the nails and cleans every thing up and makes small things like cutting boards and stuff. Stuff comes out real nice.


  • 0
  • -
DMS# 2573

#9 jmlandru

jmlandru
  • Way too many!

  • PipPipPipPipPipPipPip
  • 13,961 posts
  • Joined: Sep-09 2004

Posted February 17 2013 - 4:07 AM

Don't burn skid lumber if you can help it. They reuse skids and there may be something on there that may make ladies grow balls.


  • 0
  • -

#10 Paul_M

Paul_M
  • 5,000 Post Club!

  • PipPipPipPipPipPip
  • 8,954 posts
  • Joined: Nov-15 2001

Posted February 17 2013 - 7:24 AM

There is an old guy who comes and picks thru our skid pile and only takes the skids made from rough cut lumber. He takes them apart, scraps the nails and cleans every thing up and makes small things like cutting boards and stuff. Stuff comes out real nice.



Cutting boards....omg........some pallets come from overseas and can be treated w pesticides. The treatments kill bugs in the pallets and/or produce that ride on them. I wouldn't burn them in a open fire and hang out campfire style, either. If these are pallets are new and the origin is known that's one thing, but pulling random pallets from multiple sources............:dismay: ..............


  • 0
  • -
See you on the big one.

#11 Wraith

Wraith
  • 5,000 Post Club!

  • PipPipPipPipPipPip
  • 8,958 posts
  • Joined: Mar-24 2006

Posted February 17 2013 - 12:06 PM

Cutting boards....omg........some pallets come from overseas and can be treated w pesticides. The treatments kill bugs in the pallets and/or produce that ride on them. I wouldn't burn them in a open fire and hang out campfire style, either. If these are pallets are new and the origin is known that's one thing, but pulling random pallets from multiple sources............:dismay: ..............


There is something about that part in Red.............;)


  • 0
  • -
SLOP. (Standard Liberal Operating Procedure)

#12 J

J
  • Way too many!

  • 19,085 posts
  • Joined: Feb-23 2003
  • LocationRhode Island

Posted February 18 2013 - 5:53 AM

I've used dimensional lumber from Lowe's quite a bit. Pick through it and you can fins some nice clear stuff.
I've run it through the jointer and planer and used it for trim.


  • 0
  • -

Edmund Burke: "All that is necessary for the triumph of evil is that good men do nothing".


#13 cheech

cheech
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 1,879 posts
  • Joined: Sep-18 2007

Posted February 18 2013 - 3:33 PM

It's not furniture, but you can chop your veggies on free hardwood pallets. The handles are a ripped oak bannister.
Posted ImagePosted Image


  • 0
  • -

#14 Belmo

Belmo
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 2,897 posts
  • Joined: Dec-27 2005
  • LocationPhiladelphia

Posted March 17 2013 - 2:54 PM

I took the plunge on what is probably the most popular item on the Ana White website, the farmhouse dining table. I still have to fill the screw holes, sand, stain, and wax the thing, but the building part I just finished. The picture is below. It's definitely rustic (someone in a less than-charitable mood could use the word cheesy) but it's nevertheless a pretty strong, serviceable table that didn't cost 5 mortgage payments. We'll see how I feel after it's finished, but so far I've been kinda surprised at how good cheap framing lumber can look.

The total cost for this is probably somewhere around $300, but that includes a bunch of tools that I bought to do the job, that I'll have for future projects. If you wanted to do this on the cheap, you could easily do it for $150, or maybe less.

Right now I don't feel like ever cutting a piece of wood, or using a drill, ever again, but I'll get the itch again soon. This was a neat project for me.

Posted Image


  • 0
  • -
These opinions sponsored by nobody.

#15 cheech

cheech
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 1,879 posts
  • Joined: Sep-18 2007

Posted March 17 2013 - 3:17 PM

Nice job! Looks rustic and inviting, it kinda matches the flooring. Love the lap joints. What color stain?


  • 0
  • -