Jump to content


Photo

Penn Peerless no 9 reel


  • Please log in to reply
5 replies to this topic

#1 river monster

river monster
  • New Member

  • Pip
  • 3 posts
  • Joined: Apr-01 2011

Posted April 01 2011 - 9:17 AM

Does anybody have an illustrated manual or something to show how this reel is suppose to be put back together. I was just given 2 of them. they were corroded, and i took them apart to clean and lube but now i am having trouble putting them back together. any help would be much appriciated.

Thanks
River Monster


  • 0
  • -

#2 Tmac

Tmac
  • Elite Member

  • PipPipPipPip
  • 560 posts
  • Joined: Aug-10 2010

Posted April 01 2011 - 10:43 AM

From penn parts site. Check them out if you need any parts too. I have a question for you as well. Ive been looking at these reels online but havent held one. Ive read they are the smallest of the level lines but how small are they?
-Taylor


  • 0
  • -
(*member formerly known as '733m4c')

#3 river monster

river monster
  • New Member

  • Pip
  • 3 posts
  • Joined: Apr-01 2011

Posted April 01 2011 - 1:27 PM

They are 2and 1/2 inches in diameter on the sides, and about 3 and 1/2 wide. very lite for a 30 year old reel.


  • 0
  • -

#4 Tmac

Tmac
  • Elite Member

  • PipPipPipPip
  • 560 posts
  • Joined: Aug-10 2010

Posted April 01 2011 - 2:19 PM

cool, thanks, good luck with the reel


  • 0
  • -
(*member formerly known as '733m4c')

#5 Ken D

Ken D
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 1,528 posts
  • Joined: Oct-10 2006

Posted April 01 2011 - 8:11 PM

Does anybody have an illustrated manual or something to show how this reel is suppose to be put back together. I was just given 2 of them. they were corroded, and i took them apart to clean and lube but now i am having trouble putting them back together. any help would be much appriciated.


Thanks
River Monster



Hio....I'd slide on over to Alan Tani's web site, and scroll thru the Penn tutorials down to the Penn 209. It's the next size up from the 9/109, and should point you in the right direction. They are pretty close to one another.

The challenges (that I used to have, anyway) may be the worm shroud, and the click ratchet spring. If your dog spring is the flat bar type, not the coil spring type, see both examples in the 'short version' tutorial 113h.


  • 0
  • -

#6 river monster

river monster
  • New Member

  • Pip
  • 3 posts
  • Joined: Apr-01 2011

Posted April 01 2011 - 9:21 PM

hey thank you for the info.


  • 0
  • -