Jump to content


Photo

Best method of loading braid to spinning reels at home??


  • Please log in to reply
16 replies to this topic

#1 1dozenraw

1dozenraw
  • Way too many!

  • PipPipPipPipPipPipPip
  • 12,507 posts
  • Joined: Jun-25 2005
  • LocationThe boulder fields of Chucktown, SoCo, RI

Posted July 29 2006 - 8:34 AM

I am thinking of buying a large spool of 50-60lb braid and loading my own spinning reels. What is the best method if I don't have a spool loading machine? Or, am I better off just getting my local tackle shop to load the reels using the electric machine and paying the extra?


"We eat cold eels and think distant thoughts" Jack Johnson.


#2 Steve in Mass

Steve in Mass
  • Way too many!

  • PipPipPipPipPipPipPip
  • 48,691 posts
  • Joined: Feb-20 2000
  • LocationFoxborough, Ma

Posted July 29 2006 - 8:50 AM

What I do - get yourself some of that foam pipe insulation. Cut two short pices, and fit them over the jaws of a vise. Lay a folded towel or washcloth between the insulation in the vise. Run the braid thru the fold in the towel, thru your rod guides, and onto the reel.

Tighten down the vise to put tension on the line. Wearing a glove, hold the line between your thimb and forefinger on your non-crank hand above the reel, and start cranking. Adjust the tension on the vise as needed (as the line travels thru the towel, you will have to tighten down a bit a couple times, as it wears the towel.) This will make the line tight enough so that you can fully load the reel.

When fully loaded, to be sure I get it as tight as possible and get it to lay correctly, I then take the rod and reel over to my neighbor's driveway. I tie on a jig or a hook, and hook it to his truck bumper. I then walk off as much line as I can (preferably all the way to the backing.)

I then pull tight, as if fighting a fish, and keeping tension on the rod, slowly walk forward until it is all re-spooled. The line will lay as best and tight as it ever will. Works like a charm for me.

And not to take anything away from shop owners, but I never quite understood the advantage of having them spool your reel (other than convenience). Once you make a cast, and reel back in, all of their tedious work has vanished......


SOL Member #174

#3 bghon

bghon
  • Member

  • PipPip
  • 74 posts
  • Joined: Jul-23 2006

Posted July 29 2006 - 9:16 AM

Here i used an arrow...to put it thru the 10pcs. of new spool,thenuse my 2 feet to grab each side of the arrow...if i wanna tigher spooling ,i just press it on the ground harder while spooling in.But my best of of spooling is like fighting a big game fish style..not just turning the handle till it all spool up.



#4 1dozenraw

1dozenraw
  • Way too many!

  • PipPipPipPipPipPipPip
  • 12,507 posts
  • Joined: Jun-25 2005
  • LocationThe boulder fields of Chucktown, SoCo, RI

Posted July 29 2006 - 11:04 AM


Quote:








Originally Posted by bghon


Here i used an arrow...to put it thru the 10pcs. of new spool,thenuse my 2 feet to grab each side of the arrow...if i wanna tigher spooling ,i just press it on the ground harder while spooling in.But my best of of spooling is like fighting a big game fish style..not just turning the handle till it all spool up.








Not to knock Steve's method, but yours brings up visions of Mahatma Gandhi weaving at the loom. Excellent. All the way from Maylasia.... thanks.


"We eat cold eels and think distant thoughts" Jack Johnson.


#5 longcaster

longcaster
  • Way too many!

  • PipPipPipPipPipPipPip
  • 15,834 posts
  • Joined: Feb-15 2005

Posted July 29 2006 - 11:18 AM

When the time comes to walk the line out, try this.Instead of hooking the end of the line to something, pass the line through a swivel(clipped to something)and tie it to your rod at the collector guide. Now when you walk the line out you only have to go half as far. If you do this when it is time to reverse the line, it makes it a snap. Retie the reversed ends and wind back with tension. Most times I clip a swivel to the collector guide so if there is any twists in the line they have a chance to come out.
longcaster



#6 Seal

Seal
  • Way too many!

  • PipPipPipPipPipPipPip
  • 15,789 posts
  • Joined: Feb-25 2013

Posted July 29 2006 - 11:29 AM

I can't remember who posted this pic. I'll look around and see if I can find it's inventor.



#7 Seal

Seal
  • Way too many!

  • PipPipPipPipPipPipPip
  • 15,789 posts
  • Joined: Feb-25 2013

Posted July 29 2006 - 11:33 AM

Ok, it's designer is BobT.


Quote:








Originally Posted by BobT


......just put the full store spool between 2 moistened sponges with a screwdriver clamped in a vise. Adjust the pressure by how much the screwdriver is pressed down before locking up the vise. Feed the line through your guides, tie to the spool, and then put on one wrap of cloth electricians tape (or hockey tape, or first aid tape), then spool it up. No need for mono backing with the tape....
BobT.






#8 John P

John P
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 2,304 posts
  • Joined: Dec-17 1999

Posted July 29 2006 - 1:56 PM

Berkeley makes an inexpensive but effective system with a line stripper device included for about $35.oo. You attach your reel at one end the spool of line on hanger devise that is adjustable for tension. Works for conventionals as well. I get nice tight even spooling. JP ps Cabelas has them in the catalog.



#9 capequahog

capequahog
  • 5,000 Post Club!

  • PipPipPipPipPipPip
  • 10,242 posts
  • Joined: Sep-28 2005

Posted July 29 2006 - 2:51 PM

thread braid thru guides tie on to reel spool or to backing with uni or knot of choice, hang feed spool off convenient set up of ease, hold braid between fingers one hand reel in w/other till you got what you want on there, keep it simple people



#10 Seal

Seal
  • Way too many!

  • PipPipPipPipPipPipPip
  • 15,789 posts
  • Joined: Feb-25 2013

Posted July 29 2006 - 3:02 PM


Quote:








Originally Posted by capequahog


thread braid thru guides tie on to reel spool or to backing with uni or knot of choice, hang feed spool off convenient set up of ease, hold braid between fingers one hand reel in w/other till you got what you want on there, keep it simple people




But that takes all the fun out of it.



#11 1dozenraw

1dozenraw
  • Way too many!

  • PipPipPipPipPipPipPip
  • 12,507 posts
  • Joined: Jun-25 2005
  • LocationThe boulder fields of Chucktown, SoCo, RI

Posted July 29 2006 - 3:48 PM

So what I'm getting is tight and even tension is important. But, the rotation and twist put on by spooling directly onto the spinning reel is not an issue at all???? Correct?


"We eat cold eels and think distant thoughts" Jack Johnson.


#12 ferret

ferret
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 1,424 posts
  • Joined: Apr-21 2005

Posted July 29 2006 - 3:58 PM

If you dont want line twist use a cordless drill. Remove the spool, take out the drag, find a screw slightly smaller than the shaft hole, cover it with electrical tape and slide it in making sure it's a tight fit, place the end of the screw in the drill chuck, set up the spool of line like the other have suggested and start turnin and watch the fingers. Another method of maintaining line tension is to run it thru a big phone book.



#13 Seal

Seal
  • Way too many!

  • PipPipPipPipPipPipPip
  • 15,789 posts
  • Joined: Feb-25 2013

Posted July 29 2006 - 4:17 PM

The thing I hated most about mono line is the constant problems caused by line twist. The thing I love most about braid is that line twist isn't really an issue as far as I can tell. The line will still twist, but it's never caused me any problems.



#14 newsjeff

newsjeff
  • 1,000 Post Club!

  • PipPipPipPipPip
  • 1,795 posts
  • Joined: Aug-18 2004

Posted July 29 2006 - 5:32 PM

I use a Line Wizzard by Performance Outdoor. Works really well for me with both mono and braid.


Fool me once, shame on you...fool me twice - you go eff yourself. -Billy 40

#15 jimk/ny

jimk/ny
  • Senior Member

  • PipPipPip
  • 404 posts
  • Joined: Mar-25 2000

Posted July 29 2006 - 6:06 PM

The results of all those fancy methods will be undone after the first cast and the first normal fishing retrieve.




Back to Main Forum · Next Unread Topic →